new cut | Bristol Harbour Railway Blog

A few blog posts recently have covered the acquisition of loads of second-hand concrete sleepers. This is all in aid of bringing the New Cut branch back in to use.
It’ll soon be 10 years since the track was lifted at Butterfly Junction to make way for the Metrobus Guided Busway.

The return was delayed as in early 2020, the ongoing subsidence of the New Cut wall came to a head as the wall, the Chocolate Path and the Railway all collapsed into the Cut.

The wall has since been fixed, but then came the refurbishment of Vauxhall Bridge (halfway down the branch) which requires a large amount of scaffolding blocking the track.

The current railhead at the new section of wall, with a fenced-off Vauxhall Bridge in the background.

The aim is to be ready to commence tracklaying and sleeper replacement as soon as possible, to return trains to the station at ‘A’ Bond warehouse.
To this end, volunteers and staff, along with Larry the trusty loader, have been working down at A Bond to position the platform and track, sort through the materials and work out what is re-usable and what needs refurbishment. Hauling track out of the undergrowth is part of the challenge!
The platform has been shot-blasted and repainted to protect it.
Thanks to Chris and Katie for these photos.

Hopefully this work shows a statement of intent to the public that the branch is on its way back.

Back on the Wharf, a huge amount of hedge trimming and lineside clearance has taken place along the curve to Cumberland Road Bridge, requiring use of the Coles Crane and cage, seen here returning to the shed at the end of a running day.

The next step was the clearance of the ash pile next to the pit, which was getting rather tall. This required use of the grab and the Vincent wagon. The ashes are being used to create a walking route for trackworkers and shunters alongside the running line, where there was previously very limited clearance. Ash paths were a staple of the steam-era railway environment as there was so much of it around. More sorting and moving of sleepers and chairs was also done. The crane’s new clear acrylic roof and windscreen are very useful for this work.

More to come as work progresses….

Last weekend more preparation for the relaying of the New Cut branch to A Bond warehouse took place along with track maintenance ahead of the first running weekend of the year this coming Saturday and Sunday.

The sleepers were unloaded on to one of the flat wagons earlier in the week. The Coles Crane was to be used but needed to be on the East side of the wagon, so Larry was used to push the truck up the quayside and enable the Coles to couple up. The Coles then propelled the wagon up the branch to the siding alongside Cumberland Road bridge.

We put our cargo handling and crane direction training as seen at Docks Heritage Weekend to good use. Using the brothers (dual chain hooks) enables 2 sleepers to be loaded at a time and stacked neatly on the siding.

With that done and the wagon returned to the yard, in the afternoon the team were jacking and packing sleepers on the running line by the steam crane, as well as slewing the rails to ease the curve either side of the rail join. This required multiple jacks and a lot of sweat!