Autumn Highlights 2023

Posted on October 28, 2023 by corwinb

It’s the last operating day of the season tomorrow, so here’s a little round-up of things that have been happening.

Docks Heritage Weekend took place over 30th September/1st October.
Good turnout of volunteers in period dress, along with the Show of Strength Theatre Company interacting with the public. Henbury was in steam both days and collected the BD wagon (which had been in use with the capstan) on the Sunday after the toys had been put away.

Steam tug ‘Mayflower’ has made a return to service following repairs to its engine. It’s been great to see it working on the harbour again over the past two weekends.

‘Have a go’ week took place over the October half term, where customers can pay to have 20 minutes learning to drive the steam loco on the quayside line, followed by 20 minutes on the crane. I was firing on Thursday, Bob Edwardes took some pics too.

Henbury has been running services single-handedly this season. In the shed, Portbury’s strip-down is ongoing.

Portbury is waiting for a free slot in the workshop, currently occupied by the GWR O18 wagon. Bob lettered it up into PBA condition as 61110 earlier this month. Hopefully not long until it’s back on display.

Corrie Nash 2023

Posted on May 9, 2023 by corwinb

The railway and diesel tug ‘John King’ were operating over the Chazza Cozza weekend, with the train suitable carrying flags and bunting for the occasion.
Of course the skipper of ‘John King’ had been revising their morse code for a 12:00 sound-off!

First operating weekend of 2023

Posted on April 2, 2023 by corwinb

‘Henbury’ was out and on the quayside line this weekend. Despite a late start on Saturday due to the awful weather in the morning, things brightened up considerably!
Thanks for Beth for sharing these photos of the weekend’s running.

Henbury – First Steaming of 2023

Posted on January 10, 2023 by corwinb

Peckett 0-6-0ST ‘Henbury’ was out on test last week, the annual boiler exam is just around the corner, so there was a need to test the operation of the vacuum ejector beforehand. Last season ‘Portbury’ supplied the vacuum but with that loco now out of service for overhaul, Henbury needs to be able to operate solo.

Thanks to Beth for the photo.

June 2022 Update

Posted on June 24, 2022 by corwinb

Both locos are back in steam this coming weekend, and last Saturday/Sunday saw the steam crane in operation for the first time this year.

Chris and Mike coaling up the steam crane (Bill Drewett)

On the 3rd train on Saturday of Platinum Jubilee weekend, ‘Henbury’ blew out a gasket on the main steam pipe to the right hand cylinder. It was taken off the passenger train and sent up the branch to diagnose the issue before heading back to the shed.

‘Portbury’ worked push-pull services for the rest of the day as we waited for the Peckett to cool down enough to work on.
This involved clearing out all the ash from the smokebox, then chiselling out the cement from the smokebox floor (which is used to vacuum-seal it and prevent it drawing air through the front end).
The pipe was removed and the broken seal extracted so it could be used as a template to make a fresh one.
Once this was done, the whole lot was bolted back together and left to seal overnight.
Sunday morning a fire was lit and the loco brought back up to 50psi to test for any leaks, this having been satisfactory Chris was able to re-seal the smokebox with quick-drying cement.
Henbury rejoined the passenger train that morning which was a very satisfying result for the team.
It was my first real experience of locomotive repair and what happens when things go awry, so for me it was an education!

At the same time, the opportunity was taken to take the rear drawhook off and send it to the workshop to have the screw thread mended. The thread had been worn flat on top, preventing the nut from being tightened as much as we wanted it to be. Now it is tight against the bufferbeam.

Bob Edwardes took these pics over the weekend featuring the custom headboards he made for the locos.

Platinum Jubilee Weekend

Posted on June 4, 2022 by corwinb

Both locos are out on Thursday, Friday, Saturday and Sunday, suitably attired for the special occasion!

Throwback Thursday – Peckett Party

Posted on May 5, 2022 by corwinb

A look back to 2015 when resident Peckett ‘Henbury’ (at that point awaiting overhaul) was joined by ‘Kilmersdon’ (1788/1929) and ‘Teddy’ (2012/1941). Many thanks to David Stagg for these photos.

Steam Test Success

Posted on February 18, 2022 by corwinb

Pleased to report that the steam fleet passed their insurance inspections/tests this week ready to operate again.
Next week M Shed is doing ‘have a go week’ where you can try your hand at driving a steam loco and an electric crane!

More details:
https://www.bristolmuseums.org.uk/m-shed/whats-on/train-and-crane-driving-experiences/

Henbury in Steam on the Quayside

Posted on November 8, 2021 by corwinb

For a couple of days in ‘Have a Go Week’, Henbury was out on the quayside as the kinks are ironed out.

Thanks to Bob Edwardes for these two pics! Very nice framing through the cranes.

Aaand here are a few I took including a trip up in the crane.

Docks Heritage Weekend 2021

Posted on October 16, 2021 by corwinb

It’s been a week since the first public outing for the working exhibits in over a year, Docks Heritage Weekend. What a blast! So great to have the volunteers working with the public again. Both Portbury and Henbury were on display and the capstan was back in operation both days, and crane 30 was kept busy loading and unloading the lorry.
Quayside operations were bolstered with audience interaction from the Show of Strength Theatre company.
Thanks for Bob, Bruce and the M Shed social media channels for these photos of the weekend.