Tag Archives: Bristol Harbour Railway

Portbury Progress

Posted on by
Reply

Now Portbury’s boiler has been detubed, work moves on to the next job. Today we started the process of removing the wheelsets.
First, the eccentric rods were taken off the centre axle.

Then the brake rodding was dropped out and the brake blocks and hangers removed (fronts have been left on for now until we can move the axle due to clearances on the slide bars).

With all the gubbins out of the way, the process of jacking the loco up can start. 2 hydraulic jacks (one at each end) with 4 screw jacks (one on each corner) and plenty of timber packing. By the end of the day, we had nearly lifted the loco enough to drop the axleboxes out of the hornguides.
The weekday team will be picking things up next.

Sulphuric Acid Tanker in for the Winter

Posted on by
Reply

The tanker was picked up and turned 90 degrees today to get it into L Shed. The plan is to give the tank a spruce-up as it’s suffered more than the chassis out in the open and the paint is looking rather tatty. The Coles Crane slewed the wagon around by picking up the end and moving it over a piece at a time.
Thanks to Chris E for the photos.

Last Operating Weekend of 2024 (Sunday)

Posted on by
Reply

That’s it! Another season of passenger operations finished. Now the winter maintenance can begin.

This includes getting the tank of the Sulphiric Acid Tanker rubbed down and repainted. The chassis is still in good condition but the tank has suffered a bit from flaking paint and rust bubbles.
The Coles Crane was used to bring the tanker out of the yard and set it down on to Henbury at the end of the working day. The steam loco then propelled it onto the quayside to be pressure-washed. Earlier in the day we did a test lift to ensure the crane would be able to slew it into the warehouse.

Henbury was then ashed out (the plates in the ashpan were removed at the same time) and taken back to the shed as the light faded.

Thanks to Katie Richards for the photos.

Docks Heritage Weekend 2024

Posted on by
Reply

One of my favourite events of the year, DOCKS HERITAGE WEEKEND took place over 28th and 29th September.
This event featured our friends at the Show of Strength Theatre Company once again, this time with a new storyline (featuring George and Sheila of course) with more jeopardy and a longer run time (and some singing!).
Sheila’s ordered a new television on hire-purchase, but she’s not told George about it! Will he find out?
John King was on duty giving rides around the harbour, 2 cranes were working (one for visitors and one loading the lorry), the capstan was in operation again and Henbury was in steam for cab visits. Saturday also featured live performances from the choir in L Shed.

Thanks to Katie Richards and Bob Edwardes for these photos.

Harbour Festival 2024

Posted on by
Reply

A few photos from this year’s Harbour Festival (20th/21st July). We survived another year with lots of volunteers working together to deliver the boat and train service. Pyronaut, still fresh from overhaul, did its part in the displays showing off its pumping ability, with stalwart John King providing passenger trips. The steam launches were a personal highlight. Mixed weather didn’t appear to put too many people off as can be seen from the crowded quayside!
Thankfully on these occasions extra volunteers are deployed for crowd safety.
Thanks to Bob Edwardes and Ned Minns for the additional photos.

Autumn Highlights 2023

Posted on by
Reply

It’s the last operating day of the season tomorrow, so here’s a little round-up of things that have been happening.

Docks Heritage Weekend took place over 30th September/1st October.
Good turnout of volunteers in period dress, along with the Show of Strength Theatre Company interacting with the public. Henbury was in steam both days and collected the BD wagon (which had been in use with the capstan) on the Sunday after the toys had been put away.

Steam tug ‘Mayflower’ has made a return to service following repairs to its engine. It’s been great to see it working on the harbour again over the past two weekends.

‘Have a go’ week took place over the October half term, where customers can pay to have 20 minutes learning to drive the steam loco on the quayside line, followed by 20 minutes on the crane. I was firing on Thursday, Bob Edwardes took some pics too.

Henbury has been running services single-handedly this season. In the shed, Portbury’s strip-down is ongoing.

Portbury is waiting for a free slot in the workshop, currently occupied by the GWR O18 wagon. Bob lettered it up into PBA condition as 61110 earlier this month. Hopefully not long until it’s back on display.

Henbury – First Steaming of 2023

Posted on by
1

Peckett 0-6-0ST ‘Henbury’ was out on test last week, the annual boiler exam is just around the corner, so there was a need to test the operation of the vacuum ejector beforehand. Last season ‘Portbury’ supplied the vacuum but with that loco now out of service for overhaul, Henbury needs to be able to operate solo.

Thanks to Beth for the photo.

June 2022 Update

Posted on by
Reply

Both locos are back in steam this coming weekend, and last Saturday/Sunday saw the steam crane in operation for the first time this year.

Chris and Mike coaling up the steam crane (Bill Drewett)

On the 3rd train on Saturday of Platinum Jubilee weekend, ‘Henbury’ blew out a gasket on the main steam pipe to the right hand cylinder. It was taken off the passenger train and sent up the branch to diagnose the issue before heading back to the shed.

‘Portbury’ worked push-pull services for the rest of the day as we waited for the Peckett to cool down enough to work on.
This involved clearing out all the ash from the smokebox, then chiselling out the cement from the smokebox floor (which is used to vacuum-seal it and prevent it drawing air through the front end).
The pipe was removed and the broken seal extracted so it could be used as a template to make a fresh one.
Once this was done, the whole lot was bolted back together and left to seal overnight.
Sunday morning a fire was lit and the loco brought back up to 50psi to test for any leaks, this having been satisfactory Chris was able to re-seal the smokebox with quick-drying cement.
Henbury rejoined the passenger train that morning which was a very satisfying result for the team.
It was my first real experience of locomotive repair and what happens when things go awry, so for me it was an education!

At the same time, the opportunity was taken to take the rear drawhook off and send it to the workshop to have the screw thread mended. The thread had been worn flat on top, preventing the nut from being tightened as much as we wanted it to be. Now it is tight against the bufferbeam.

Bob Edwardes took these pics over the weekend featuring the custom headboards he made for the locos.